More informations about mt3 atomizer you should know.

About MT3 Atomizer

Ⅰ. Introduction

The MT3 is nonflammable electronic atomizing device, which gives you the same feeling as that of a tobacco cigarette, but do not need any ignition. The MT3 is marked as a healthier alternative to tobacco smoking since most of the harmful material produced by the combustion of tobacco in traditional cigarettes is not present in the atomized e-liquid of e-cigarettes. So it’s a good ideal substitute for cigarette.

The MT3 exchangeable & detachable atomizer (clearomizer), is a newly generated electronic cigarette. Users can easily check the atomizer directly, replace and wash the coil inside. If the clearomizer needs to be cleaned or when mechanical problems occur, users only need change the broken cartomizer coil head, which will keep the clearomizer as new and clean as you have it the first time.

Besides, The MT3 vaporizer adopts environmental brass material, nickel plating on the surface; stainless material, stoving varnish process; you can also choose vacuum coating or rubber paint process. MT3 comes with bottom dual heating coils, which will create huge vapor and much purer taste, it will give you more comfortable vape experience.

Ⅱ. Specification

Volume: 1.6ohm of e-liquid

Resistance: 1.8Ω/2.4Ω/2.8Ω /3.2Ω /4.0Ω

Colors(rubber paint): titanium/black/white/silver/purple/green/blue/pink/red

Thread: Ego/510 thread

MT3 vaporizer is made up of 3 parts: tube, coil head, bottom base; all parts can be replaceable.

Ⅲ. Package

5pcs/box

  

IV. How to use

A. How to change the coil head of MT3 Atomizer (clearomizer)

Step 1: Unscrew the MT3 Atomizer (clearomizer) tube from MT3 Atomizer (Clearomizer) base.

Step 2: Unscrew the MT3 Atomizer (clearomizer) coil head from the top of the base assembly.

Step 3: Screw the new MT3 Atomizer (clearomizer) coil head onto the clearomizer base again.

Step 4: Screw the MT3 Atomizer (clearomizer) tube back onto the clearomizer base.

B. How to refill e-liquid into MT3 Atomizer (clearomizer)

Step 1: Unscrew the bottom coil from the MT3 clearomizer.

Step 2: Fill the e-liquid into the MT3 Atomizer (clearomizer) by inserting e-liquid down the inside wall (Do not fill e-liquid in the center hole, that is for air flow).

Step 3: Screw the MT3 Atomizer (clearomizer) drop tip back into the clearomizer tube (do not screw too tightly).

Step 4: Please wait 1-2 minutes for the e-liquid to feed into the coil before you start to vape.

C. How to enjoy your MT3Atomizer e-cigarette

Screw the filled MT3 Atomizer (clearomizer) with the EVOD battery, then will be stand-by state.

Notes: The MT3 Atomizer works only when you press the EVOD battery LED button. Press the LED button and inhale at the same time.

Ⅴ.Attention

1.      Please keep the battery away from high temperature environments, do not store battery in hot or humid environments. Do not drop battery. Do not force battery. Keep battery away from sharp objects.

2.      Do not connect the anode and cathode of the battery with metal, which may create short circuit.

3.      Please keep the MT3 out of the reach of children.

4.      Avoid collisions, drops and other sources of shock to damage the product.

5.      In case your eyes come into contact with leakage from the battery or the atomization liquid, do not rub your eye but wash it with clean water right away and contact your physician for help as soon as possible.

6.      If you don’t plan on using the MT3 for a long time, please remove the battery.

Ⅵ. Suitable and forbidden people

1.      Suitable for:

1. People with long smoking history and suffering from uncomfortable feeling.
2. People who work in non-smoking environments but desire to smoking.
3. People determined to quit smoking.

2.      Unsuitable for:

1. Minors under the age of 18.
2. People who do not smoke.
3. People sensitive to nicotine or any other ingredients in the inhalant.
4. Pregnant and breast feeding women.
5. People whose doctor forbids them from smoking.