Lavatube S2 on hot selling

The newest Lavatube :
chrome, sliver, black, Metallic black four colors for choice,
ego thread can connect with the CE4 and ego atomizer without any adapter,
Variable voltage:3v-6v.
three protection for the battery,
The led display show the voltage and the resistance of the atomizer,

e-cab mini e-cig kit, changable battery and changeable atomizer on hot selling

This latest mini ecigarette— eCab is highly recommended for its replaceable atomizer and battery.
Each eCab atomizer is made up of an eGab atomizer head (the same as eGo-C atomizer head type A) and a special eCab atomizer body. so you can just replace the coil head when the atomizer does not work.
Each eCab battery consists of an eCab battery housing and a changeable li-ion 10440 360mAh battery. You can replace a new Li-ion 10440 battery and charge the li-ion battery separately.
The battery has a constant output voltage of 3.3v and 10 seconds cut-off time.
Moreover, the battery has 5-click lock/unlock function, reverse battery protection and low voltage protection.
5-click lock/unlcok function : Press the button 5 times within 2.0 seconds to lock/unlock the battery.
Reverse battery protection: while battery is installed upside down.the control panel will cut off the power supply,protecting the battery and control units .
Low voltage protection: When the battery voltage is lower than 3.3V, LED blinks 40 times ,the battery will shut down.
Please note: The threading of eCab is unique. It is NOT compatible with any atomizers or batteries with 510/eGo threading!

Each kit includes:
*1pc eCab Atomizer cone
*3pcs eCab Atomizer head 
*1pc eCab Battery housing (1pc battery housing includes 1pc battery body and 1pc battery cap)
*2pcs eCab 360mAh rechargeable Li-ion 10440 battery
*3pcs eCab transparent empty catridges
*1pc eCab Battery Charger
*1pc wall adapter
*1pc English Instruction Manual
Brand: Trueman
Unit: Set
Shipping weight:335g
Colors: Black/White/Silver/Red/Pink
Size of ecigaratte: Length 130mm; Diameter 10mm
Threading:eCab
Package: gift box
How to replace the atomizer head ? (Please check graphic instruction)
* Unscrew the atomizer cone with your hand.
* Take out the old atomizer head.
* Assemble the new atomizer head.
* Screw the atomizer cone.
How to Charge the battery?
* Unscrew the battery cap
* Take the battery out
* Insert the 360mAh battery into eCab Charger battery
* Make sure that the polarity of battery is correct
* Plug the eCab charger into USB wall charger or on the computer directly
* Charging time: 2 hours
Warranty:
180 days for eCab battery housing.
Only accept DOA for other parts.
 Please refer to Warranty Policy for details.

Vmax electronic cigarette on hot selling!

Function of Vmax 1.Built-in three digit display allows you to visually adjust your voltage 2.Output Voltage: adjustable from 3.0v~6.0v  in 0.1 volt increments 3.Discharge voltage: 6v~8.4v 4.quiescent current: <100uA 5.Step-down regulator 6.Battery: stacked 2 pcs IMR Nipple 600mah 18350 battery 7.VMax can handle 5Amps or even bigger current 8.Protection against short   circuit.Protection against installing the battery backwards.The mod monitor the battery voltage and automatically shuts off when the battery is discharged.
User Settings Uu- Power up Ud- Power down So- Power on/off Uc- Battery Check dS - display information setting (- do- atomizer output  voltage -du- battery output voltage -dR - atomizer ohm ) Lo - LED on/off		Power adjust up	1. Press the button 3 times in a row until  "Uu" is shown on the display . 2. When Uu is shown on the display , leave the button ilde for 2 seconds. They display will change to show the last voltage selected. 3. Once the voltage is displayed, each time you press the button the voltage will advance to the next higher setting: 3.1,3.2,3.3 etc.  When you reach 6.0, it will rotate back to 3.0 and go up again. 4. when you have reached the desired settin, leave the button idle for 2 second. The setting will be saved and VV will resum normal operation.
		Power adjust down	1. Press the button 4 times in a row until  "Ud" is shown on the display . 2. When Ud is shown on the display , leave the button ilde for 2 seconds. They display will change to show the last voltage selected. 4. Once the voltage is displayed, each time you press the button the voltage will advance to the next lower setting: 5.9,5.8,5.7 etc.  When you reach 3.0, it will rotate back to 6.0 and go up again. 4. when you have reached the desired settin, leave the button idle for 2 second. The setting will be saved and VV will resum normal operation.
		Power on/ off	1. Press the button 5 times in a row until  "So" is shown on the display . 2. When Ud is shown on the display , leave the button ilde for 2 seconds. They display will show the last setting , on or off . 4. Each time you press the button the display will toggle between on/off 4. when you have reached the desired setting, leave the button idle for 2 second. If you selected "OF"  the VV will go into standby mode.
		Battery Check	1. Press the button 6 times in a row until Uc is shown on the display. 2. When Uc is shown on the display, leave the button idle for 2 seconds, the digital display will show your battery voltage measurement. 3. The battery voltage will be displayed for 2 seconds, then the display will turn off.
		Display information setting during vaping	1. Press the button 7 times in a row until dS is shown on the display, 2. When dS is shown on the display, leave the button for 2 seconds, the display will show the current setting: do ,du or dr . 3. Each time you press the button, the setting will toggle among   "do" "du" or "dR" , 4. When "do" is chosen, leave the button idle for 2 second, the setting will be saved and the display will show your atomizer working output voltage during your vaping; 5. When "du" is chosen, leave the button idle for 2 second, the setting will be saved and the display will show your battery  voltage during your vaping. 6. When " dR" is chosen,leave the button idle for 2 second, the setting will be saved and  the display will show your atomizer resistence during your vaping.
		LED ON /OFF	1.  Press the button 8 times in a row until "Lo" is shown on the display. 2. When Lo is shown on the display ,leave the button idle for 2 seconds , they display will show the current setting: ON/OFF . 3. Each time you press the button, the setting will toggle between on/off. 4. when you have reached the desired settinh, leave the button idle for 2 seconds. The setting will be saved and VV will resume normal operation.
short circuit protection		output short circuit protection during vaping	The display will show the below error code when there is short circuit: 1. F1:  resistance for  the heating coil of cartomizer is bigger than 0.5R, or smaller than 1.3R 2. F2:  resistance for the  heating coil of cartomizer is smaller then 0.5R
Suggested  cartomizer ohm		3V-4V  for  1.5ohm,4V-5V for 2.0-2.5ohm,5V-6V for 3.0ohm.