Lavatube S2 on hot selling

The newest Lavatube :
chrome, sliver, black, Metallic black four colors for choice,
ego thread can connect with the CE4 and ego atomizer without any adapter,
Variable voltage:3v-6v.
three protection for the battery,
The led display show the voltage and the resistance of the atomizer,

e-cab mini e-cig kit, changable battery and changeable atomizer on hot selling

This latest mini ecigarette— eCab is highly recommended for its replaceable atomizer and battery.
Each eCab atomizer is made up of an eGab atomizer head (the same as eGo-C atomizer head type A) and a special eCab atomizer body. so you can just replace the coil head when the atomizer does not work.
Each eCab battery consists of an eCab battery housing and a changeable li-ion 10440 360mAh battery. You can replace a new Li-ion 10440 battery and charge the li-ion battery separately.
The battery has a constant output voltage of 3.3v and 10 seconds cut-off time.
Moreover, the battery has 5-click lock/unlock function, reverse battery protection and low voltage protection.
5-click lock/unlcok function : Press the button 5 times within 2.0 seconds to lock/unlock the battery.
Reverse battery protection: while battery is installed upside down.the control panel will cut off the power supply,protecting the battery and control units .
Low voltage protection: When the battery voltage is lower than 3.3V, LED blinks 40 times ,the battery will shut down.
Please note: The threading of eCab is unique. It is NOT compatible with any atomizers or batteries with 510/eGo threading!

Each kit includes:
*1pc eCab Atomizer cone
*3pcs eCab Atomizer head 
*1pc eCab Battery housing (1pc battery housing includes 1pc battery body and 1pc battery cap)
*2pcs eCab 360mAh rechargeable Li-ion 10440 battery
*3pcs eCab transparent empty catridges
*1pc eCab Battery Charger
*1pc wall adapter
*1pc English Instruction Manual
Brand: Trueman
Unit: Set
Shipping weight:335g
Colors: Black/White/Silver/Red/Pink
Size of ecigaratte: Length 130mm; Diameter 10mm
Threading:eCab
Package: gift box
How to replace the atomizer head ? (Please check graphic instruction)
* Unscrew the atomizer cone with your hand.
* Take out the old atomizer head.
* Assemble the new atomizer head.
* Screw the atomizer cone.
How to Charge the battery?
* Unscrew the battery cap
* Take the battery out
* Insert the 360mAh battery into eCab Charger battery
* Make sure that the polarity of battery is correct
* Plug the eCab charger into USB wall charger or on the computer directly
* Charging time: 2 hours
Warranty:
180 days for eCab battery housing.
Only accept DOA for other parts.
 Please refer to Warranty Policy for details.

Vmax electronic cigarette on hot selling!

Function of Vmax 1.Built-in three digit display allows you to visually adjust your voltage 2.Output Voltage: adjustable from 3.0v~6.0v  in 0.1 volt increments 3.Discharge voltage: 6v~8.4v 4.quiescent current: <100uA 5.Step-down regulator 6.Battery: stacked 2 pcs IMR Nipple 600mah 18350 battery 7.VMax can handle 5Amps or even bigger current 8.Protection against short   circuit.Protection against installing the battery backwards.The mod monitor the battery voltage and automatically shuts off when the battery is discharged.
User Settings Uu- Power up Ud- Power down So- Power on/off Uc- Battery Check dS - display information setting (- do- atomizer output  voltage -du- battery output voltage -dR - atomizer ohm ) Lo - LED on/off		Power adjust up	1. Press the button 3 times in a row until  "Uu" is shown on the display . 2. When Uu is shown on the display , leave the button ilde for 2 seconds. They display will change to show the last voltage selected. 3. Once the voltage is displayed, each time you press the button the voltage will advance to the next higher setting: 3.1,3.2,3.3 etc.  When you reach 6.0, it will rotate back to 3.0 and go up again. 4. when you have reached the desired settin, leave the button idle for 2 second. The setting will be saved and VV will resum normal operation.
		Power adjust down	1. Press the button 4 times in a row until  "Ud" is shown on the display . 2. When Ud is shown on the display , leave the button ilde for 2 seconds. They display will change to show the last voltage selected. 4. Once the voltage is displayed, each time you press the button the voltage will advance to the next lower setting: 5.9,5.8,5.7 etc.  When you reach 3.0, it will rotate back to 6.0 and go up again. 4. when you have reached the desired settin, leave the button idle for 2 second. The setting will be saved and VV will resum normal operation.
		Power on/ off	1. Press the button 5 times in a row until  "So" is shown on the display . 2. When Ud is shown on the display , leave the button ilde for 2 seconds. They display will show the last setting , on or off . 4. Each time you press the button the display will toggle between on/off 4. when you have reached the desired setting, leave the button idle for 2 second. If you selected "OF"  the VV will go into standby mode.
		Battery Check	1. Press the button 6 times in a row until Uc is shown on the display. 2. When Uc is shown on the display, leave the button idle for 2 seconds, the digital display will show your battery voltage measurement. 3. The battery voltage will be displayed for 2 seconds, then the display will turn off.
		Display information setting during vaping	1. Press the button 7 times in a row until dS is shown on the display, 2. When dS is shown on the display, leave the button for 2 seconds, the display will show the current setting: do ,du or dr . 3. Each time you press the button, the setting will toggle among   "do" "du" or "dR" , 4. When "do" is chosen, leave the button idle for 2 second, the setting will be saved and the display will show your atomizer working output voltage during your vaping; 5. When "du" is chosen, leave the button idle for 2 second, the setting will be saved and the display will show your battery  voltage during your vaping. 6. When " dR" is chosen,leave the button idle for 2 second, the setting will be saved and  the display will show your atomizer resistence during your vaping.
		LED ON /OFF	1.  Press the button 8 times in a row until "Lo" is shown on the display. 2. When Lo is shown on the display ,leave the button idle for 2 seconds , they display will show the current setting: ON/OFF . 3. Each time you press the button, the setting will toggle between on/off. 4. when you have reached the desired settinh, leave the button idle for 2 seconds. The setting will be saved and VV will resume normal operation.
short circuit protection		output short circuit protection during vaping	The display will show the below error code when there is short circuit: 1. F1:  resistance for  the heating coil of cartomizer is bigger than 0.5R, or smaller than 1.3R 2. F2:  resistance for the  heating coil of cartomizer is smaller then 0.5R
Suggested  cartomizer ohm		3V-4V  for  1.5ohm,4V-5V for 2.0-2.5ohm,5V-6V for 3.0ohm.

How to use ego vv battery

How to use VV ego battery 900mah?

Step 1 put the battery into the body,

Notice: please notice the position of the positive and negative of the battery

Step 2, screw the body, then the battery can be work normally,

Step 3, Press the”+”to increase the voltage and press “-” to reduce the voltage,

Step 4, when you adjust to the voltage you prefer, you can enter the button 3 for 5 contisious time, then the battery will be lock, and it will keep the previous voltage working, then Press the button 3 for 5times again, the battery will be unlocked.

upgrade ce4 clearomizer on hot selling

Dear purchasing manager,
Good day!
How is everything going? This is Laura from TRUEMAN,
Upgrade CE4 V2 clearomizer: Customized resistance & Spring electrode on selling now! (please see the below picture)
Customized resistance:1.8ohm, 2.4ohm, 2.8ohm, 3.2ohm, 4.0ohm,
Spring electrode connetct with the battery more perfect,

Meanwhile ego-rs removeable battery. CE4 V3 coil replaceable clearomizer, eGo-T4, ego-t, Chrome Lavatube, and etc. is our hot selling products!
If you need some samples for test, Please contact me freely.

Welcome to visite www.trueman-ecig.com for more information about our products,
Any questions, please let me know freely.  
Thanks & Best regards,
Laura
-------------------------------------------------------------------------------------------TRUEMAN TECHNOLOGY (ZhengZhou) LTDTel:  86-371-63709496
Email: sales03@trueman-ecig.com
MSN: truemanecig003@hotmail.com
Skype:truemanecig003
www.trueman-ecig.com
http://henwy.en.alibaba.com

Trade Manager ID: cn1001106393

Add:Room1302,West Unit,No.6 Buiding,Jinchen International Plaza,
Zhenghzou,China 450000

 

 

ego-rs changeable battery on selling

Good news to inform you: we have the newest ego-rs battery on selling now, (Please see the blew pictures)

Meanwhile ego-c twist battery Promotion price: usd10.88/pc

Would you like to have a try?

Ego-RS battery

1.Ego thread,

2.Changable battery

3.Live longer

New products from trueman

This newly-released variable voltage battery eGo Twist is the latest variable voltage battery which has inner smart buck-boost converter and can adjust output voltage from 3.2v ~ 4.8v with each increment of 0.2v by spinning the knob at the bottom. The battery can work at 4.8v stably. The voltage output won't decrease even when power is less.

eGo Twist is safer than regular eGo batteries because it has 3 kinds of Protections:
1. Short Circuit Protection: the battery will stop work when short circuit happens.
2. Atomizer Protection: If you press the button for 10 seconds, the battery will be locked until the next press.
3. Low Voltage Protection: the battery will stop work when the battery voltage is lower than 3.3v.

Brand:Trueman
Unit:1pc
Shipping weight:45g
Capacity:650mAh/900mah/1100mah
Colors:Matte black/Stainless/Pink/White/titanium/red/blue etc.
Size:Length 98mm/Diameter 14mm

Please note:
* The eGo Twist battery has the lock/unlock function the same as eGo T and eGo C batteries. So please press the button 5 clicks within 2 seconds and activate the battery prior to the use.
* A fully-charged eGo Twist variable voltage battery can work 6 hours.
* Using the battery at a higher voltage output will drain the battery faster than at a lower voltage. We suggest you start with a low voltage and increase the voltage gradually until you find the right voltage for your atomizer/cartomizer.

How to charge?
* The battery can be charged by eGo USB Charger directly.
* Charging time: 2.5 hours

Warranty: 90 days. Please refer to Warranty Policy for details.

How to use 510-T

TURE MAN 510-T:

I.Base Package:

The e-cigarette BE510-T/Joye510-T(tank) starter kit including:

*  1 BE510-T atomizer

*  2 BE510 MEGA batteries (3.7V 280mAh, BE510, BE510-T use the same battery or MEGA battery)

*  1 BE510 AC adapter

*  1 Power cord

*  1 bottle 10ml e-liquid

*  5 pcs Blank BE510-T/901-T Cartridges

II. How to use

a. Screw the e-cigarette BE510-T battery:

Screw and connect the e-cigarette 510-T battery with the e-cigarette 510-T tank atomizer, then will be stand-by state.

b. : Uncover the e-cigarette BE510-T/901-T blank Cartridge( BE901-T and BE510-T use the same tank cartridges):

Take off the 510-T cartridge rubber cap.

c. Fill the e-liuid to the e-cigarette 510-T tank cartridge:

Step 1: Take out the e-liquid bottle lid;

Step 2: Drip the e-liquid to the e-cigarette 510-T tank cartridge until full;

Step 3: Cover the cartridge rubber cap again.

d. Put the e-cigarette 510-T tank cartridge into the e-cigarette 510-T tank system atomizer:

Step1: Screw down the old inhaler;

Step2: Put the filled e-cigarette 510-T tank cartridge into the e-cigarette 510-T.

* The e-cigarette manal 510-T works only when you press the switch button. Press the switch button and inhale at the same time.

e. Charge the pen style e-cigarette BE510-T tank system battery:
You need change the battery when the battery LED flash 8 times and the circuit stops working no smoke production. To charge the mini e-cigarette battery, you just screw the mini e-cigarette battery with the special charger, just a second, the battery LED will be flashed 3 times, then the charger indicator light will turns red from the green. The mini e-cigarette battery is fully charger wehn the indicator light turns green from red again.  The charging time for the regular use should be 2.5-3 hours. The charger works with the normal voltage at 100-240V, 50/60Hz.

How to use ego-t

I.Base Package:

The e-cigarette eGo-T(tank) starter kit including:

1. Atomizing device.

2. Rechargeable  650mAh Manual battery.

3. USB  Charger  420ma.

4. AC-USB adapter (with US plug or EURO plug or UK plug).

5. Cartridge.

6. Instruction Manual.

II. How to use

a. Screw the e-cigarette eGo-T battery:

Screw and connect the e-cigarette eGo-T battery with the e-cigarette eGo-T tank atomizer, then will be stand-by state.

b. : Uncover the e-cigarette eGo-T blank Cartridge:

:Take off the eGo-T cartridge plastic cover.

c. Fill the e-liuid to the e-cigarette eGo-T tank cartridge:

Step 1: Take out the e-liquid bottle lid;

Step 2: Drip the e-liquid to the e-cigarette eGo-T tank cartridge until full;

Step 3: Cover the cartridge plastic cover again.

d. Put the e-cigarette eGo-T tank cartridge into the e-cigarette eGo-T atomizer:

Step 1: Screw down the old inhaler;

Step 2: Put the filled e-cigarette eGo-T tank cartridge into the e-cigarette eGo-T.

     * The e-cigarette eGo-T works only when you press the LED button. Press the LED button and inhale at the same time.

e. Charge the e-cigarette eGo-T battery:

       You just screw the e-cigarette eGo battery with the USB charger, then plug it into the PC or AC-USB Adapter. 1. the first charge should be kept for 8 hours, even if the LED light turns green. 2. Use for 20 minutes., 3. Charge the battery for another 1 hour. Your e-cigarette eGo battery is ready for normal using now. The normal charging time should be kept for 3 hours( even if the LED light turns green).

ego -v4

Dear purchasing manager,
Good day!
How is everything going? This is Laura from TRUEMAN,
Newest products in August:  eGo-V4( ego vv battery add CE4 V3 coil Replaceable clearomizer) kit on selling now! (please see the below picture)
clearomizer and variable voltage ego battery,
Coil replaceable, colorful and 5 different resistance,
Variable voltage 3v-6v, and lcd display, passthrough battery,

Meanwhile CE4 V2, eGo-T4, ego-t, Lavatube, Lavatube vv350 and etc. is our hot selling products!
If you need some samples for test, Please contact me freely.

Welcome to visite www.trueman-ecig.com for more information about our products,
Any questions, please let me know freely.  
Thanks & Best regards,
Laura

-------------------------------------------------------------------------------------------TRUEMAN TECHNOLOGY (ZhengZhou) LTDTel:  86-371-63709496
Email: sales03@trueman-ecig.com
MSN: truemanecig003@hotmail.com
Skype:truemanecig003
www.trueman-ecig.com
http://henwy.en.alibaba.com

Trade Manager ID: cn1001106393

Add:Room1302,West Unit,No.6 Buiding,Jinchen International Plaza,
Zhenghzou,China 450000

 

 

 

Chrome steel lavatube on hot selling

Chrome steel lavatube on hot selling

upgrade of lavatube,
510 and ego thread, fit ce4 without any adopter,

How to use F6

TRUEMAN-F6

I.Base Package:

An F6 starter kit includes: 
1.Atomizing device.

2.360mAh Rechargeable battery.

3.100-240V  Charger (US plug or Euro plug).

4. Empty Cartridge.

5. Instruction Manual.

II. How to use

a.   take the little machine out of the cartomizer.

b.   Take out the pipe from the pipe shell.

c.   Fill the e-liuid to the F6 clear cartomizer:

Fill the e-liquid to the F6 clear cartomizer.

d.    Screw the pipe on the little machine.

e.    Put the F6 cartomizer shell to the F6 clear cartomizer again.

     * The F6 works only when you press the eGo LED button. Press the LED button and inhale at the same time.

f.   Screw the F6 cartomizer to the battery.

g.   Charge the eGo-W battery:

         You just screw theF6 battery with the USB charger, then plug it into the PC or AC-USB Adapter. 1. the first charge should be kept for 8 hours, even if the LED light turns green. 2. Use for 20 minutes., 3. Charge the battery for another 1 hour. Your eGo battery is ready for normal using now. The normal charging time should be kept for 3 hours( even if the LED light turns green).

TUREMAN-ego-c:how to use ego-c?

TUREMAN-ego-c:

I. Base packaging:

E-cigarette EGO-C starter kit including:

1.    Atomizing head

2.    Rechargeable 650mAh manual battery.

3.    Atomizer cone.

4.    Atomizer base.

5.    USB charger 420ma.

6.    AC-USB adapter (with US plug or EURO plug or UK plug).

7.    Cartridge.

8.    Instruction manual.

2.    How to use eGo-C changeable e-cigarette

a. Assemble the eGo-C atomizer set:
Step 1: Screw off the eGo-C base from eGo-C cone cover(if there have cartridge in the atomizer cone cover, please take it off first);

Step 2: Carefully put the eGo-C atomizer into the eGo-C atomizer base;

Step 3: Screw the eGo-C cone cover with eGo-C atomizer base again.

b. Screw the eGo-C atomizer set with the eGo battery:

crew and connect the eGo-C atomizer set with the  eGo battery, then they will be stand-by state.

c. Uncover the eGo-C blank cartridge:

Step 1: Cut the plastic package;
Step 2: Take off the cartridge rubber cap.

e. Put the filled cartridge into the eGo-C:

* The eGo-W works only when you press the eGo LED button. Press the LED button and inhale at the same time.

f. Charge the eGo-C battery:

You just screw the eGo battery with the USB charger, then plug it into the PC or AC-USB Adapter.

1. the first charge should be kept for 8 hours, even if the LED light turns green.

2. Use for 20 minutes.,

3. Charge the battery for another 1 hour. Your eGo battery is ready for normal using now. The normal charging time should be kept for 3 hours( even if the LED light turns green).